LANDU Fire Engine Red PLA Basic 3D printer filament 1kg spool featuring neat winding and an eco-friendly cardboard roll.

LANDU Beige PLA Basic 3D printer filament 1kg spool demonstrating smooth texture and bubble-free quality.

LANDU Mint Green PLA Basic 3D printer filament 1kg spool offering a vibrant pastel color for creative 3D printing projects.

LANDU Rose Red PLA Basic 3D printer filament 1kg spool showcasing high color accuracy and wide compatibility.

LANDU Sky Blue PLA Basic 3D printer filament 1kg spool designed for easy, clog-free 3D printing.

LANDU Golden PLA Basic 3D printer filament 1kg spool highlighting consistent color and tangle-free winding.

LANDU Dark Blue PLA Basic 3D printer filament 1kg spool on a recycled cardboard roll for reliable FDM printing.

LANDU PLA Basic Filament 1.75mm 1kg

Q: What should I do if the first layer isn't sticking?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"First, ensure your bed is properly leveled and clean the surface with isopropyl alcohol to remove finger oils. If adhesion issues persist, check that your nozzle temperature is around 200 ℃, your bed is at 60 ℃, and your initial layer speed is reduced."}]}]}

Q: Does PLA Basic emit toxic fumes during printing?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"No. LANDU PLA Basic is derived from plant-based materials and produces a mild, slightly sweet odor during printing. It is safe for use in open environments like classrooms, homes, and offices with normal ventilation."}]}]}

Q: Do I need a heated bed to print this filament?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"No, but it is highly recommended. While you can print PLA Basic on an unheated bed using adhesive glue or blue painter's tape, setting a heated bed to 45–60 ℃ ensures the best first-layer adhesion and prevents edge warping."}]}]}

Q: Do I need to dry the filament before use?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Usually, no. PLA Basic is far less prone to absorbing moisture compared to materials like PETG or Nylon. However, if you experience stringing or popping sounds after long-term exposure to high humidity, drying it at 40–45 ℃ for 4 hours is recommended."}]}]}

Q: Is this material suitable for load-bearing functional parts?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"No. While PLA is rigid and holds sharp details well, it is relatively brittle and has low heat resistance. For functional parts under high mechanical stress, we recommend stronger materials like PETG or ABS."}]}]}

$37.99 USD

Buy 2 Get 5% OFF | Code: LANDU10

Copy

Color

Fire Engine Red Beige Mint Green Sky Blue Rose Red Golden Dark Blue

Fast Shipping

15-Day Return

Secure Checkout

Why choose LANDU PLA Basic?

Easy Printing for Beginners (Designed for simple operation with stable extrusion, low warping, and a high printing success rate)
Excellent Printing Stability (Consistent filament diameter and smooth material flow help achieve reliable print quality)
Low Warping Performance (Features naturally low shrinkage, making it suitable for open-frame FDM printers without requiring an enclosed chamber)

What should I do if the first layer isn't sticking?

First, ensure your bed is properly leveled and clean the surface with isopropyl alcohol to remove finger oils. If adhesion issues persist, check that your nozzle temperature is around 200 ℃, your bed is at 60 ℃, and your initial layer speed is reduced.

Does PLA Basic emit toxic fumes during printing?

No. LANDU PLA Basic is derived from plant-based materials and produces a mild, slightly sweet odor during printing. It is safe for use in open environments like classrooms, homes, and offices with normal ventilation.

Do I need a heated bed to print this filament?

No, but it is highly recommended. While you can print PLA Basic on an unheated bed using adhesive glue or blue painter's tape, setting a heated bed to 45–60 ℃ ensures the best first-layer adhesion and prevents edge warping.

Do I need to dry the filament before use?

Usually, no. PLA Basic is far less prone to absorbing moisture compared to materials like PETG or Nylon. However, if you experience stringing or popping sounds after long-term exposure to high humidity, drying it at 40–45 ℃ for 4 hours is recommended.

Is this material suitable for load-bearing functional parts?

No. While PLA is rigid and holds sharp details well, it is relatively brittle and has low heat resistance. For functional parts under high mechanical stress, we recommend stronger materials like PETG or ABS.

Product introduction

LANDU PLA Basic Filament 1.75mm 1kg is an easy-to-use PLA 3D printing filament designed for beginners, makers and everyday FDM printing projects. As one of the most popular 3D printing materials, PLA provides excellent printing stability, low warping performance and reliable extrusion.

With a balanced formula optimized for smooth printing and consistent layer quality, LANDU PLA Basic works well for colorful models, prototypes, educational projects and creative designs. Made from PLA material derived from renewable plant-based resources, it produces minimal odor during printing and is suitable for home, classroom and office environments.

Available in multiple colors including Fire Engine Red PLA Filament, Beige PLA Filament, Mint Green PLA Filament, Sky Blue PLA Filament, Rose Red PLA Filament, Golden PLA Filament and Dark Blue PLA Filament, LANDU PLA Basic helps creators achieve vibrant and detailed 3D prints.

Key Features

Easy Printing for Beginners
PLA Basic is designed for simple operation with stable extrusion, low warping and a high printing success rate.
Excellent Printing Stability
Consistent filament diameter and smooth material flow help achieve reliable print quality.
Low Warping Performance
PLA naturally has low shrinkage, making it suitable for open-frame FDM printers without requiring an enclosed chamber.
Wide Printer Compatibility
Works with most 1.75mm FDM 3D printers including Bambu Lab, Creality, Prusa, Anycubic, Elegoo and FlashForge.

Recommended Applications

LANDU PLA Basic Filament is suitable for:

Anime figures
Game models
Desktop decorations
Vases
Pen holders
Storage boxes
Educational models
Product prototypes
Creative crafts
Household accessories

Supports Bambu Lab AMS workflows for convenient filament management.

Physical Properties

Material PLA

Diameter 1.75 mm

Weight 1 kg (Net)

Diameter Tolerance ± 0.02 mm

Recommended Printing Settings

Printing Temperature 190-210 ℃

Heated Bed Temperature 45–60 ℃

Nozzle Recommendation 0.4 mm

Print Speed 40-300 mm/s

Compatible Printers

Bambu Lab Verified

Creality Verified

Prusa Verified

Select variant

$37.99

Language

Country/region

LANDU PLA Basic Filament 1.75mm 1kg

Key Features

Recommended Applications