Résine standard LANDU 1KG Résine UV 405nm pour imprimantes 3D

Q: Why did my print fail, sticking to the FEP/nFEP film instead of the build plate?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"This is usually caused by insufficient bottom exposure time or an unlevel build plate. For LANDU Standard Resin, try increasing your bottom exposure time by 5–10 seconds, ensure your build plate is properly leveled, and check that the print is adequately hollowed with proper suction-relieving holes."}]}]}

Q: What solvent should I use to clean my printed parts?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"You should use 95% or higher concentration Isopropyl Alcohol (IPA) or specialized resin cleaner. Submerge the printed model in the solvent for a few minutes and gently scrub with a soft brush to remove uncured liquid resin. Do not wash directly under running tap water unless using a dedicated water-washable resin."}]}]}

Q: How long should I cure the model under UV light after cleaning?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"After washing and completely drying the model, cure it under a 405nm UV curing light for 2 to 5 minutes (depending on the size and wall thickness of the model). Avoid over-curing, as excessive UV exposure can make standard resin overly brittle and prone to yellowing."}]}]}

Q: Can I use LANDU Standard Resin for functional or load-bearing mechanical parts?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"No. Standard resin offers a balanced performance with a Shore hardness of 86D and tensile strength of 46 MPa, making it fantastic for miniatures and display figures. However, it is relatively rigid and can be brittle under sudden impact or high mechanical stress. For functional mechanical parts, specialized tough or ABS-like resins are recommended."}]}]}

Q: How should I safely store unused resin and dispose of waste?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Store unused resin in its original bottle, tightly sealed, in a cool, dark, and well-ventilated place away from direct sunlight (ideally between 15–25°C). Never pour liquid resin down the drain. Always cure waste resin (including paper towels and rinse water containing resin residue) completely under sunlight or a UV lamp before disposing of it safely in accordance with local regulations."}]}]}

$24.99 USD

Buy 2 Get 5% OFF | Code: LANDU10

Copy

Capacité

1000 ml 2000 ml

Fast Shipping

15-Day Return

Secure Checkout

Why choose Résine standard LANDU 1KG Résine UV 405nm pour imprimantes 3D?

High Detail Accuracy (Reproduces fine details, sharp edges, and complex textures with excellent precision for miniature models and detailed figures)
Smooth Surface Finish (Produces smooth printed surfaces with clear contours, reducing the need for extensive post-processing)
Cost-Effective Resin Solution (An economical choice for daily printing, learning, prototyping, and batch production)

Why did my print fail, sticking to the FEP/nFEP film instead of the build plate?

This is usually caused by insufficient bottom exposure time or an unlevel build plate. For LANDU Standard Resin, try increasing your bottom exposure time by 5–10 seconds, ensure your build plate is properly leveled, and check that the print is adequately hollowed with proper suction-relieving holes.

What solvent should I use to clean my printed parts?

You should use 95% or higher concentration Isopropyl Alcohol (IPA) or specialized resin cleaner. Submerge the printed model in the solvent for a few minutes and gently scrub with a soft brush to remove uncured liquid resin. Do not wash directly under running tap water unless using a dedicated water-washable resin.

How long should I cure the model under UV light after cleaning?

After washing and completely drying the model, cure it under a 405nm UV curing light for 2 to 5 minutes (depending on the size and wall thickness of the model). Avoid over-curing, as excessive UV exposure can make standard resin overly brittle and prone to yellowing.

Can I use LANDU Standard Resin for functional or load-bearing mechanical parts?

No. Standard resin offers a balanced performance with a Shore hardness of 86D and tensile strength of 46 MPa, making it fantastic for miniatures and display figures. However, it is relatively rigid and can be brittle under sudden impact or high mechanical stress. For functional mechanical parts, specialized tough or ABS-like resins are recommended.

How should I safely store unused resin and dispose of waste?

Store unused resin in its original bottle, tightly sealed, in a cool, dark, and well-ventilated place away from direct sunlight (ideally between 15–25°C). Never pour liquid resin down the drain. Always cure waste resin (including paper towels and rinse water containing resin residue) completely under sunlight or a UV lamp before disposing of it safely in accordance with local regulations.

Product introduction

La résine standard LANDU est une résine photopolymère 405 nm abordable et fiable, conçue pour les imprimantes 3D LCD, MSLA et DLP. Avec une excellente stabilité dimensionnelle, une qualité de surface lisse et une reproduction précise des détails, elle est idéale pour les débutants, les fabricants et les concepteurs créant des modèles miniatures, des figurines d'anime, des prototypes et des pièces d'exposition. Disponible en options de 1 kg et 2 kg avec plusieurs choix de couleurs, cette résine standard offre une combinaison équilibrée de qualité d'impression, de facilité d'utilisation et de rentabilité pour l'impression 3D en résine au quotidien.

Caractéristiques principales

Précision des détails élevée
Reproduit les détails fins, les bords nets et les textures complexes avec une excellente précision, ce qui la rend adaptée aux modèles miniatures et aux figurines détaillées.
Finition de surface lisse
Produit des surfaces imprimées lisses avec des contours nets, réduisant le besoin de post-traitement extensif.
Performances mécaniques équilibrées
Offre un équilibre pratique entre dureté, rigidité et ténacité pour les applications d'impression en résine au quotidien.
Expérience d'impression facile
Conçue avec des performances d'impression stables et une bonne tolérance aux réglages d'exposition, aidant les débutants à réaliser des impressions réussies.
Solution de résine rentable
Un choix économique pour l'impression quotidienne, l'apprentissage, le prototypage et la production en série.
Large compatibilité d'imprimantes
Compatible avec la plupart des imprimantes 3D à résine LCD, MSLA et DLP de 405 nm.

Applications recommandées

Modèles miniatures
Parfait pour :

Figurines de table
Modèles de personnages
Petites sculptures

Figurines d'anime et de jeux
Convient pour :

Personnages détaillés
Modèles de collection
Pièces d'exposition

Prototypes de produits
Idéal pour :

Vérification de l'apparence
Évaluation de la conception
Modèles conceptuels

Modèles éducatifs
Convient pour :

Modèles pédagogiques
Objets de démonstration
Affichages non porteurs

Material & Properties

Product Type Standard Photopolymer

Material UV Curable Resin

Capacity 1000ml / 2000ml

Compatibility & Usage

Wavelength 405nm

Printer Type LCD / MSLA / DLP

Application Figures / Miniatures

Property	Test Method	Value
Tensile Strength	ASTM D638	46 MPa
Elastic Modulus	ASTM D638	1150 MPa
Elongation at Break	ASTM D638	15%
Bending Strength	ASTM D790	50 MPa
Flexural Modulus	ASTM D790	1600 MPa
Notched Impact	ASTM D256	22 J/m
Shore Hardness	ASTM D2240	86D
Heat Deflection Temperature	ASTM D648	60°C

Langue

Pays/Région

Résine standard LANDU 1KG Résine UV 405nm pour imprimantes 3D

Caractéristiques principales

Applications recommandées

Mechanical Properties