LANDU PLA Filament 1,75 mm 1 kg

Q: Why won't the first layer stick to my print bed?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"First-layer adhesion issues are usually caused by three things: an unlevel bed, a dirty print surface, or incorrect nozzle height (Z-offset). Wash your PEI sheet with warm dish soap and water, ensure your bed is heated to 45–60 ℃, and lower your Z-offset so the filament is slightly squished into the bed."}]}]}

Q: My prints are warping or curling at the corners. How do I fix this?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Warping happens when the plastic cools and contracts too quickly. To prevent this, ensure your heated bed is set between 50–60 ℃. Also, keep your printer away from cold drafts or open windows. For sharp-cornered models, adding a \"Brim\" in your slicer settings will help hold the corners down."}]}]}

Q: Can I put objects printed with PLA in the dishwasher or microwave?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"No. Standard PLA has a low glass transition temperature, meaning it starts to soften and deform at around 55–60 ℃. The boiling water in a dishwasher or the heat from a microwave will completely melt and ruin your print."}]}]}

Q: Why did my nozzle suddenly clog halfway through a print?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"For PLA, mid-print clogs are often caused by \"heat creep,\" where heat travels up the hotend and melts the filament before it reaches the nozzle. Ensure your hotend cooling fan is working properly and avoid printing PLA in an enclosed, hot chamber. Also, check that your filament isn't tangled on the spool."}]}]}

Q: How should I store the filament when I'm not printing?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Although standard PLA is not as moisture-sensitive as PETG or Nylon, leaving it exposed to a humid room for weeks can make it brittle and cause stringing. Always store it in a sealed bag or airtight box with desiccant silica gel packets."}]}]}

Why won't the first layer stick to my print bed?

First-layer adhesion issues are usually caused by three things: an unlevel bed, a dirty print surface, or incorrect nozzle height (Z-offset). Wash your PEI sheet with warm dish soap and water, ensure your bed is heated to 45–60 ℃, and lower your Z-offset so the filament is slightly squished into the bed.

My prints are warping or curling at the corners. How do I fix this?

Warping happens when the plastic cools and contracts too quickly. To prevent this, ensure your heated bed is set between 50–60 ℃. Also, keep your printer away from cold drafts or open windows. For sharp-cornered models, adding a "Brim" in your slicer settings will help hold the corners down.

Can I put objects printed with PLA in the dishwasher or microwave?

No. Standard PLA has a low glass transition temperature, meaning it starts to soften and deform at around 55–60 ℃. The boiling water in a dishwasher or the heat from a microwave will completely melt and ruin your print.

Why did my nozzle suddenly clog halfway through a print?

For PLA, mid-print clogs are often caused by "heat creep," where heat travels up the hotend and melts the filament before it reaches the nozzle. Ensure your hotend cooling fan is working properly and avoid printing PLA in an enclosed, hot chamber. Also, check that your filament isn't tangled on the spool.

How should I store the filament when I'm not printing?

Although standard PLA is not as moisture-sensitive as PETG or Nylon, leaving it exposed to a humid room for weeks can make it brittle and cause stringing. Always store it in a sealed bag or airtight box with desiccant silica gel packets.

Product introduction

Le filament PLA LANDU 1,75 mm 1 kg est un matériau d'impression 3D FDM facile à imprimer, conçu pour les débutants, les fabricants, les concepteurs et les créateurs de tous les jours. Fabriqué à partir de PLA, ce filament offre une extrusion fiable, une qualité de surface lisse et des performances d'impression stables pour une large gamme d'applications d'impression 3D.

Disponible en plusieurs couleurs, notamment le filament PLA noir, le filament PLA blanc, le filament PLA rouge, le filament PLA bleu, le filament PLA vert, le filament PLA orange, le filament PLA rose, le filament PLA violet, le filament PLA marron, le filament PLA argent, le filament PLA jaune et le filament PLA transparent, LANDU PLA offre un excellent choix de couleurs pour les modèles créatifs, les prototypes, les décorations et les objets d'usage quotidien.

Compatible avec les imprimantes 3D FDM populaires, notamment Bambu Lab, Creality, Prusa, Anycubic, Elegoo et FlashForge, le filament PLA LANDU est un choix fiable pour les débutants et les fabricants expérimentés à la recherche de performances d'impression 3D abordables et constantes.

Caractéristiques principales

Impression facile
Le matériau PLA offre une excellente imprimabilité avec un faible gauchissement, ce qui le rend adapté aux débutants et à l'impression quotidienne.
Plusieurs options de couleur
Disponible dans une large gamme de couleurs, y compris le noir, le blanc, le rouge, le bleu, le vert et le transparent pour des projets créatifs.
Finition de surface lisse
Produit des détails nets et des surfaces attrayantes pour les modèles, les décorations et les prototypes.
Performances d'impression stables
Conçu avec un contrôle de diamètre constant pour une extrusion fiable.
Large compatibilité
Fonctionne avec la plupart des imprimantes 3D FDM de 1,75 mm.

Prend en charge les flux de travail Bambu Lab AMS pour une gestion pratique du filament.

Langue

Pays/Région

Caractéristiques principales