LANDU Filament PETG Rapide 1.75mm 1kg | PETG Impression Rapide

Q: How can I reduce stringing when printing Rapid PETG?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Stringing is usually caused by wet filament or printing too hot. First, dry the filament at 65 ℃ for 4 to 6 hours. If stringing persists, lower your printing temperature by 5 ℃ increments and slightly increase your retraction distance in the slicer."}]}]}

Q: Will PETG damage my glass build plate?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"It can. PETG adheres incredibly well to glass and can actually chip or shatter bare glass when removed. You must apply a release agent, such as glue stick, hairspray, or blue painter’s tape, before printing on a glass bed."}]}]}

Q: Do I need to dry Rapid PETG before printing?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Yes, drying is strongly recommended. PETG is hygroscopic and absorbs moisture from the air quickly. Wet PETG will cause severe stringing, popping noises during extrusion, and brittle prints. Dry it at 65 ℃ for 4 to 6 hours."}]}]}

Q: Should I use a cooling fan for functional PETG parts?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"For maximum mechanical strength and layer adhesion, turn the part cooling fan off or keep it low (10-30%). However, if you are printing at high speeds and need sharp details or bridges, you can increase the fan speed up to 50%."}]}]}

Q: How is Rapid PETG different from standard PLA?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Rapid PETG is significantly tougher, more flexible, and has higher temperature resistance (up to ~75 ℃) than PLA. It also resists water and UV light better, making it the superior choice for outdoor functional parts."}]}]}

How can I reduce stringing when printing Rapid PETG?

Stringing is usually caused by wet filament or printing too hot. First, dry the filament at 65 ℃ for 4 to 6 hours. If stringing persists, lower your printing temperature by 5 ℃ increments and slightly increase your retraction distance in the slicer.

Will PETG damage my glass build plate?

It can. PETG adheres incredibly well to glass and can actually chip or shatter bare glass when removed. You must apply a release agent, such as glue stick, hairspray, or blue painter’s tape, before printing on a glass bed.

Do I need to dry Rapid PETG before printing?

Yes, drying is strongly recommended. PETG is hygroscopic and absorbs moisture from the air quickly. Wet PETG will cause severe stringing, popping noises during extrusion, and brittle prints. Dry it at 65 ℃ for 4 to 6 hours.

Should I use a cooling fan for functional PETG parts?

For maximum mechanical strength and layer adhesion, turn the part cooling fan off or keep it low (10-30%). However, if you are printing at high speeds and need sharp details or bridges, you can increase the fan speed up to 50%.

How is Rapid PETG different from standard PLA?

Rapid PETG is significantly tougher, more flexible, and has higher temperature resistance (up to ~75 ℃) than PLA. It also resists water and UV light better, making it the superior choice for outdoor functional parts.

Product introduction

Le filament LANDU Rapid PETG 1,75 mm 1 kg est un matériau d'impression 3D PETG à grande vitesse conçu pour les fabricants, les ingénieurs et les créateurs qui ont besoin d'une impression plus rapide sans sacrifier la durabilité. Grâce à une formule PETG optimisée, le Rapid PETG offre des performances de refroidissement améliorées, une extrusion fluide et une impression fiable à des vitesses élevées.

Combinant les caractéristiques d'impression facile du PLA avec la ténacité et la durabilité du PETG, le LANDU Rapid PETG convient aux pièces fonctionnelles, aux prototypes, aux composants mécaniques et aux produits du quotidien qui nécessitent une meilleure résistance aux chocs.

Disponible en plusieurs couleurs, notamment le filament PETG vert rapide, le filament PETG gris sidéral rapide, le filament PETG bleu rapide, le filament PETG marron rapide, le filament PETG orange rapide, le filament PETG beige rapide et le filament PETG jaune rapide, le LANDU Rapid PETG offre à la fois des performances fiables et des modèles finis attrayants.

Caractéristiques principales

Impression PETG à grande vitesse
La formule PETG optimisée améliore les performances de refroidissement et de solidification, prenant en charge les flux de travail d'impression à grande vitesse tout en maintenant une qualité d'impression fiable.
Grande ténacité et durabilité
Comparé au PLA standard, le PETG offre une meilleure ténacité, une meilleure résistance aux chocs et une meilleure durabilité pour les applications fonctionnelles.
Facilité d'impression
Le LANDU Rapid PETG offre une extrusion fluide, une formation stable et des problèmes d'impression réduits tels qu'une mauvaise adhérence ou un collage de la buse.
Résistance à l'eau et aux produits chimiques
Le PETG offre une bonne résistance à l'humidité et à de nombreux produits chimiques courants, ce qui le rend adapté aux applications pratiques et extérieures.