LANDU 120ml 3D printer bed adhesion spray bottle and packaging box, designed to prevent print warping and enhance bed bonding.

Demonstration of applying LANDU 3D printing adhesive spray. Hold 15cm from the heated bed at a 45-degree angle for an instant thin layer.

Comparison showing firm bed bonding during 3D printing and easy, tool-free model removal once the print bed cools down.

Comparison showing LANDU smooth 3D printer spray leaving a uniform layer, avoiding the messy residue and clogging of traditional glue sticks.

Five-step usage guide for LANDU 3D printing bed spray, highlighting strong adhesion during printing and easy water washable cleanup.

LANDU 120ml long-lasting 3D printer bed adhesion spray bottle, providing enough liquid formula for over 500 prints.

A tall 3D printed vase successfully printed without warping, demonstrating strong bed adhesion even with a small 3.5cm contact area.

LANDU adhesive spray compatibility chart showing recommended heated bed temperatures for PLA, ABS, PETG, and TPU filaments on glass and metal beds.

LANDU odorless and non-toxic 3D printing adhesive spray, offering an eco-friendly and safe printing experience for makers.

LANDU Spray d'adhérence pour lit d'imprimante 3D 150 ml

Q: How do I apply LANDU Bed Adhesion Spray correctly for the best results?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"For best results, remove the build plate from your printer before spraying to prevent any overspray from getting onto the printer's linear rails, bearings, or optical sensors. Spray an even, thin layer from a distance of about 20–30 cm onto a clean, room-temperature or slightly warm build plate, then reinstall it."}]}]}

Q: Does this spray protect PEI sheets from being ruined by PETG?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Yes! PETG is notorious for bonding too aggressively to bare PEI surfaces, sometimes tearing chunks out of the sheet. Applying a thin layer of LANDU Bed Adhesion Spray acts as a protective release barrier, ensuring strong first-layer adhesion while allowing easy removal once cooled."}]}]}

Q: What are the recommended heated bed temperatures for different filaments when using this spray?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"For optimal performance, set your heated bed according to the filament type:\n\n- PLA / PLA Silk: 50–60°C\n- PETG: 70–75°C\n- TPU: 60°C\n- ABS: 90–100°C\n- ASA / PC / PEEK: 100°C"}]}]}

Q: How do I clean the adhesive residue off the build plate?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Cleaning is extremely simple because the formula is water-washable. Just remove the build plate, wipe it down with a damp cloth and warm water, or wash it under the tap with mild dish soap to completely clear away old residue."}]}]}

Q: Will my prints be hard to remove from the bed after using this spray?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"No. While it provides powerful adhesion while the bed is hot (preventing warping during printing), the adhesive grip releases naturally as the build plate cools down to room temperature. Most prints will pop off easily once the bed cools."}]}]}

$20.99 USD

Buy 2 Get 5% OFF | Code: LANDU10

Copy

Capacité

120 ml

Fast Shipping

15-Day Return

Secure Checkout

Why choose LANDU Spray d'adhérence pour lit d'imprimante 3D 150 ml?

Strong First Layer Adhesion (Creates a reliable adhesive layer between the print surface and filament to reduce edge lifting and print failures)
Anti-Warping Performance (Helps improve printing stability for materials that are more sensitive to shrinkage, including PETG, ABS, ASA, and larger models)
Washable and Easy Release (Allows for easier model removal after cooling and can be simply cleaned with water for convenient maintenance)

How do I apply LANDU Bed Adhesion Spray correctly for the best results?

For best results, remove the build plate from your printer before spraying to prevent any overspray from getting onto the printer's linear rails, bearings, or optical sensors. Spray an even, thin layer from a distance of about 20–30 cm onto a clean, room-temperature or slightly warm build plate, then reinstall it.

Does this spray protect PEI sheets from being ruined by PETG?

Yes! PETG is notorious for bonding too aggressively to bare PEI surfaces, sometimes tearing chunks out of the sheet. Applying a thin layer of LANDU Bed Adhesion Spray acts as a protective release barrier, ensuring strong first-layer adhesion while allowing easy removal once cooled.

What are the recommended heated bed temperatures for different filaments when using this spray?

For optimal performance, set your heated bed according to the filament type:

- PLA / PLA Silk: 50–60°C
- PETG: 70–75°C
- TPU: 60°C
- ABS: 90–100°C
- ASA / PC / PEEK: 100°C

How do I clean the adhesive residue off the build plate?

Cleaning is extremely simple because the formula is water-washable. Just remove the build plate, wipe it down with a damp cloth and warm water, or wash it under the tap with mild dish soap to completely clear away old residue.

Will my prints be hard to remove from the bed after using this spray?

No. While it provides powerful adhesion while the bed is hot (preventing warping during printing), the adhesive grip releases naturally as the build plate cools down to room temperature. Most prints will pop off easily once the bed cools.

Product introduction

Le spray d'adhérence pour plateau d'imprimante 3D LANDU est conçu pour améliorer l'adhérence de la première couche et réduire les échecs d'impression causés par la déformation ou le détachement du modèle. Ce spray adhésif de 150 ml pour plateau de construction crée une couche de liaison stable entre le filament et la surface d'impression tout en restant facile à retirer après l'impression. Il convient au PLA, PETG, ABS, ASA, TPU et autres matériaux d'impression 3D FDM. Compatible avec les feuilles PEI, les plaques d'acier à ressort, les plateformes en verre et les plateaux de construction en métal, il aide les fabricants à obtenir des impressions plus fiables pour les modèles quotidiens comme pour les projets à grande échelle.

Caractéristiques Clés

Forte adhérence de la première couche
Crée une couche adhésive fiable entre la surface d'impression et le filament, aidant à réduire le décollement des bords et les échecs d'impression.
Performance anti-déformation
Aide à améliorer la stabilité d'impression pour les matériaux plus sensibles au retrait, y compris le PETG, l'ABS, l'ASA et les modèles plus grands.
Démoulage facile après refroidissement
L'adhésif devient efficace lorsque la température du plateau de construction augmente et permet un retrait plus facile du modèle après l'impression.
Application longue durée
Une seule application de spray peut prendre en charge plusieurs cycles d'impression, réduisant la fréquence d'application répétée.
Lavable et nettoyage facile
La couche adhésive peut être nettoyée à l'eau, ce qui rend l'entretien simple et pratique.
Large compatibilité
Conçu pour les plateformes d'imprimantes 3D FDM courantes, y compris le PEI, l'acier à ressort, le verre et les plateaux de construction métalliques.