LANDU Standardharz 1KG 405nm UV Harz für 3D-Drucker

Q: Why did my print fail, sticking to the FEP/nFEP film instead of the build plate?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"This is usually caused by insufficient bottom exposure time or an unlevel build plate. For LANDU Standard Resin, try increasing your bottom exposure time by 5–10 seconds, ensure your build plate is properly leveled, and check that the print is adequately hollowed with proper suction-relieving holes."}]}]}

Q: What solvent should I use to clean my printed parts?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"You should use 95% or higher concentration Isopropyl Alcohol (IPA) or specialized resin cleaner. Submerge the printed model in the solvent for a few minutes and gently scrub with a soft brush to remove uncured liquid resin. Do not wash directly under running tap water unless using a dedicated water-washable resin."}]}]}

Q: How long should I cure the model under UV light after cleaning?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"After washing and completely drying the model, cure it under a 405nm UV curing light for 2 to 5 minutes (depending on the size and wall thickness of the model). Avoid over-curing, as excessive UV exposure can make standard resin overly brittle and prone to yellowing."}]}]}

Q: Can I use LANDU Standard Resin for functional or load-bearing mechanical parts?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"No. Standard resin offers a balanced performance with a Shore hardness of 86D and tensile strength of 46 MPa, making it fantastic for miniatures and display figures. However, it is relatively rigid and can be brittle under sudden impact or high mechanical stress. For functional mechanical parts, specialized tough or ABS-like resins are recommended."}]}]}

Q: How should I safely store unused resin and dispose of waste?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Store unused resin in its original bottle, tightly sealed, in a cool, dark, and well-ventilated place away from direct sunlight (ideally between 15–25°C). Never pour liquid resin down the drain. Always cure waste resin (including paper towels and rinse water containing resin residue) completely under sunlight or a UV lamp before disposing of it safely in accordance with local regulations."}]}]}

$24.99 USD

Buy 2 Get 5% OFF | Code: LANDU10

Copy

Kapazität

1000 ml 2000 ml

Fast Shipping

15-Day Return

Secure Checkout

Why choose LANDU Standardharz 1KG 405nm UV Harz für 3D-Drucker?

High Detail Accuracy (Reproduces fine details, sharp edges, and complex textures with excellent precision for miniature models and detailed figures)
Smooth Surface Finish (Produces smooth printed surfaces with clear contours, reducing the need for extensive post-processing)
Cost-Effective Resin Solution (An economical choice for daily printing, learning, prototyping, and batch production)

Why did my print fail, sticking to the FEP/nFEP film instead of the build plate?

This is usually caused by insufficient bottom exposure time or an unlevel build plate. For LANDU Standard Resin, try increasing your bottom exposure time by 5–10 seconds, ensure your build plate is properly leveled, and check that the print is adequately hollowed with proper suction-relieving holes.

What solvent should I use to clean my printed parts?

You should use 95% or higher concentration Isopropyl Alcohol (IPA) or specialized resin cleaner. Submerge the printed model in the solvent for a few minutes and gently scrub with a soft brush to remove uncured liquid resin. Do not wash directly under running tap water unless using a dedicated water-washable resin.

How long should I cure the model under UV light after cleaning?

After washing and completely drying the model, cure it under a 405nm UV curing light for 2 to 5 minutes (depending on the size and wall thickness of the model). Avoid over-curing, as excessive UV exposure can make standard resin overly brittle and prone to yellowing.

Can I use LANDU Standard Resin for functional or load-bearing mechanical parts?

No. Standard resin offers a balanced performance with a Shore hardness of 86D and tensile strength of 46 MPa, making it fantastic for miniatures and display figures. However, it is relatively rigid and can be brittle under sudden impact or high mechanical stress. For functional mechanical parts, specialized tough or ABS-like resins are recommended.

How should I safely store unused resin and dispose of waste?

Store unused resin in its original bottle, tightly sealed, in a cool, dark, and well-ventilated place away from direct sunlight (ideally between 15–25°C). Never pour liquid resin down the drain. Always cure waste resin (including paper towels and rinse water containing resin residue) completely under sunlight or a UV lamp before disposing of it safely in accordance with local regulations.

Product introduction

LANDU Standardharz ist ein erschwingliches und zuverlässiges 405-nm-Photopolymerharz, das für LCD-, MSLA- und DLP-3D-Drucker entwickelt wurde. Mit ausgezeichneter Dimensionsstabilität, glatter Oberflächenqualität und präziser Detailwiedergabe ist es ideal für Anfänger, Maker und Designer, die Miniaturmodelle, Anime-Figuren, Prototypen und Ausstellungsstücke erstellen. Erhältlich in 1-kg- und 2-kg-Optionen mit mehreren Farbvarianten, bietet dieses Standardharz eine ausgewogene Kombination aus Druckqualität, Benutzerfreundlichkeit und Kosteneffizienz für den täglichen Harz-3D-Druck.

Hauptmerkmale

Hohe Detailgenauigkeit
Reproduziert feine Details, scharfe Kanten und komplexe Texturen mit ausgezeichneter Präzision und eignet sich daher für Miniaturmodelle und detaillierte Figuren.
Glatte Oberfläche
Erzeugt glatte gedruckte Oberflächen mit klaren Konturen, wodurch der Bedarf an umfangreicher Nachbearbeitung reduziert wird.
Ausgewogene mechanische Leistung
Bietet ein praktisches Gleichgewicht zwischen Härte, Steifigkeit und Zähigkeit für alltägliche Harzdruckanwendungen.
Einfaches Druckerlebnis
Entwickelt mit stabiler Druckleistung und guter Toleranz gegenüber Belichtungseinstellungen, um Anfängern zu erfolgreichen Drucken zu verhelfen.
Kostengünstige Harzlösung
Eine wirtschaftliche Wahl für den täglichen Druck, zum Lernen, für Prototypen und für die Serienproduktion.
Breite Druckerkompatibilität
Kompatibel mit den meisten 405-nm-LCD-, MSLA- und DLP-Harz-3D-Druckern.

Empfohlene Anwendungen

Miniaturmodelle
Perfekt für:

Tabletop-Figuren
Charaktermodelle
Kleine Skulpturen

Anime- & Spielefiguren
Geeignet für:

Detaillierte Charaktere
Sammlermodelle
Ausstellungsstücke

Produktprototypen
Ideal für:

Erscheinungsbildprüfung
Designbewertung
Konzeptmodelle

Lehrmodelle
Geeignet für:

Lehrmodelle
Demonstrationsobjekte
Nicht tragende Displays

Material & Properties

Product Type Standard Photopolymer

Material UV Curable Resin

Capacity 1000ml / 2000ml

Compatibility & Usage

Wavelength 405nm

Printer Type LCD / MSLA / DLP

Application Figures / Miniatures

Property	Test Method	Value
Tensile Strength	ASTM D638	46 MPa
Elastic Modulus	ASTM D638	1150 MPa
Elongation at Break	ASTM D638	15%
Bending Strength	ASTM D790	50 MPa
Flexural Modulus	ASTM D790	1600 MPa
Notched Impact	ASTM D256	22 J/m
Shore Hardness	ASTM D2240	86D
Heat Deflection Temperature	ASTM D648	60°C

Sprache

Land/Region

LANDU Standardharz 1KG 405nm UV Harz für 3D-Drucker

Hauptmerkmale

Empfohlene Anwendungen

Mechanical Properties