LANDU PLA Filament 1,75mm 1kg | Farbe FDM 3D-Druck

Q: Why won't the first layer stick to my print bed?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"First-layer adhesion issues are usually caused by three things: an unlevel bed, a dirty print surface, or incorrect nozzle height (Z-offset). Wash your PEI sheet with warm dish soap and water, ensure your bed is heated to 45–60 ℃, and lower your Z-offset so the filament is slightly squished into the bed."}]}]}

Q: My prints are warping or curling at the corners. How do I fix this?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Warping happens when the plastic cools and contracts too quickly. To prevent this, ensure your heated bed is set between 50–60 ℃. Also, keep your printer away from cold drafts or open windows. For sharp-cornered models, adding a \"Brim\" in your slicer settings will help hold the corners down."}]}]}

Q: Can I put objects printed with PLA in the dishwasher or microwave?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"No. Standard PLA has a low glass transition temperature, meaning it starts to soften and deform at around 55–60 ℃. The boiling water in a dishwasher or the heat from a microwave will completely melt and ruin your print."}]}]}

Q: Why did my nozzle suddenly clog halfway through a print?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"For PLA, mid-print clogs are often caused by \"heat creep,\" where heat travels up the hotend and melts the filament before it reaches the nozzle. Ensure your hotend cooling fan is working properly and avoid printing PLA in an enclosed, hot chamber. Also, check that your filament isn't tangled on the spool."}]}]}

Q: How should I store the filament when I'm not printing?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Although standard PLA is not as moisture-sensitive as PETG or Nylon, leaving it exposed to a humid room for weeks can make it brittle and cause stringing. Always store it in a sealed bag or airtight box with desiccant silica gel packets."}]}]}

Why won't the first layer stick to my print bed?

First-layer adhesion issues are usually caused by three things: an unlevel bed, a dirty print surface, or incorrect nozzle height (Z-offset). Wash your PEI sheet with warm dish soap and water, ensure your bed is heated to 45–60 ℃, and lower your Z-offset so the filament is slightly squished into the bed.

My prints are warping or curling at the corners. How do I fix this?

Warping happens when the plastic cools and contracts too quickly. To prevent this, ensure your heated bed is set between 50–60 ℃. Also, keep your printer away from cold drafts or open windows. For sharp-cornered models, adding a "Brim" in your slicer settings will help hold the corners down.

Can I put objects printed with PLA in the dishwasher or microwave?

No. Standard PLA has a low glass transition temperature, meaning it starts to soften and deform at around 55–60 ℃. The boiling water in a dishwasher or the heat from a microwave will completely melt and ruin your print.

Why did my nozzle suddenly clog halfway through a print?

For PLA, mid-print clogs are often caused by "heat creep," where heat travels up the hotend and melts the filament before it reaches the nozzle. Ensure your hotend cooling fan is working properly and avoid printing PLA in an enclosed, hot chamber. Also, check that your filament isn't tangled on the spool.

How should I store the filament when I'm not printing?

Although standard PLA is not as moisture-sensitive as PETG or Nylon, leaving it exposed to a humid room for weeks can make it brittle and cause stringing. Always store it in a sealed bag or airtight box with desiccant silica gel packets.

Product introduction

LANDU PLA Filament 1,75 mm 1 kg ist ein einfach zu druckendes FDM-3D-Druckmaterial, das für Anfänger, Hersteller, Designer und alltägliche Kreative entwickelt wurde. Hergestellt aus PLA, bietet dieses Filament eine zuverlässige Extrusion, eine glatte Oberflächenqualität und eine stabile Druckleistung für eine Vielzahl von 3D-Druckanwendungen.

Erhältlich in verschiedenen Farben, darunter schwarzes PLA-Filament, weißes PLA-Filament, rotes PLA-Filament, blaues PLA-Filament, grünes PLA-Filament, oranges PLA-Filament, pinkes PLA-Filament, lila PLA-Filament, braunes PLA-Filament, silbernes PLA-Filament, gelbes PLA-Filament und transparentes PLA-Filament, bietet LANDU PLA eine ausgezeichnete Farbauswahl für kreative Modelle, Prototypen, Dekorationen und Alltagsgegenstände.

Kompatibel mit gängigen FDM-3D-Druckern, einschließlich Bambu Lab, Creality, Prusa, Anycubic, Elegoo und FlashForge, ist LANDU PLA Filament eine zuverlässige Wahl für Anfänger und erfahrene Hersteller, die eine erschwingliche und konsistente 3D-Druckleistung suchen.

Hauptmerkmale

Einfaches Drucken
PLA-Material bietet hervorragende Bedruckbarkeit mit geringem Verzug und ist somit für Anfänger und den täglichen Druck geeignet.
Mehrere Farboptionen
Erhältlich in einer Vielzahl von Farben, darunter Schwarz, Weiß, Rot, Blau, Grün und Transparent für kreative Projekte.
Glatte Oberfläche
Erzeugt saubere Details und ansprechende Oberflächen für Modelle, Dekorationen und Prototypen.
Stabile Druckleistung
Entwickelt mit konstanter Durchmesserregelung für zuverlässige Extrusion.
Breite Kompatibilität
Funktioniert mit den meisten 1,75-mm-FDM-3D-Druckern.

Unterstützt Bambu Lab AMS-Workflows für eine bequeme Filamentverwaltung.

Sprache

Land/Region

LANDU PLA Filament 1,75 mm 1 kg

Hauptmerkmale