LANDU Rapid PETG Filament 1.75mm 1kg | Schnell druckendes PETG

Q: How can I reduce stringing when printing Rapid PETG?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Stringing is usually caused by wet filament or printing too hot. First, dry the filament at 65 ℃ for 4 to 6 hours. If stringing persists, lower your printing temperature by 5 ℃ increments and slightly increase your retraction distance in the slicer."}]}]}

Q: Will PETG damage my glass build plate?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"It can. PETG adheres incredibly well to glass and can actually chip or shatter bare glass when removed. You must apply a release agent, such as glue stick, hairspray, or blue painter’s tape, before printing on a glass bed."}]}]}

Q: Do I need to dry Rapid PETG before printing?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Yes, drying is strongly recommended. PETG is hygroscopic and absorbs moisture from the air quickly. Wet PETG will cause severe stringing, popping noises during extrusion, and brittle prints. Dry it at 65 ℃ for 4 to 6 hours."}]}]}

Q: Should I use a cooling fan for functional PETG parts?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"For maximum mechanical strength and layer adhesion, turn the part cooling fan off or keep it low (10-30%). However, if you are printing at high speeds and need sharp details or bridges, you can increase the fan speed up to 50%."}]}]}

Q: How is Rapid PETG different from standard PLA?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Rapid PETG is significantly tougher, more flexible, and has higher temperature resistance (up to ~75 ℃) than PLA. It also resists water and UV light better, making it the superior choice for outdoor functional parts."}]}]}

How can I reduce stringing when printing Rapid PETG?

Stringing is usually caused by wet filament or printing too hot. First, dry the filament at 65 ℃ for 4 to 6 hours. If stringing persists, lower your printing temperature by 5 ℃ increments and slightly increase your retraction distance in the slicer.

Will PETG damage my glass build plate?

It can. PETG adheres incredibly well to glass and can actually chip or shatter bare glass when removed. You must apply a release agent, such as glue stick, hairspray, or blue painter’s tape, before printing on a glass bed.

Do I need to dry Rapid PETG before printing?

Yes, drying is strongly recommended. PETG is hygroscopic and absorbs moisture from the air quickly. Wet PETG will cause severe stringing, popping noises during extrusion, and brittle prints. Dry it at 65 ℃ for 4 to 6 hours.

Should I use a cooling fan for functional PETG parts?

For maximum mechanical strength and layer adhesion, turn the part cooling fan off or keep it low (10-30%). However, if you are printing at high speeds and need sharp details or bridges, you can increase the fan speed up to 50%.

How is Rapid PETG different from standard PLA?

Rapid PETG is significantly tougher, more flexible, and has higher temperature resistance (up to ~75 ℃) than PLA. It also resists water and UV light better, making it the superior choice for outdoor functional parts.

Product introduction

LANDU Rapid PETG Filament 1,75mm 1kg ist ein hochgeschwindigkeits PETG 3D-Druckmaterial, das für Maker, Ingenieure und Kreative entwickelt wurde, die schnelleres Drucken ohne Einbußen bei der Haltbarkeit benötigen. Mit einer optimierten PETG-Formel bietet Rapid PETG eine verbesserte Kühlleistung, eine reibungslose Extrusion und zuverlässiges Drucken bei hohen Geschwindigkeiten.

LANDU Rapid PETG kombiniert die einfachen Druckeigenschaften von PLA mit der Zähigkeit und Haltbarkeit von PETG und eignet sich für Funktionsteile, Prototypen, mechanische Komponenten und Alltagsprodukte, die eine bessere Schlagfestigkeit erfordern.

Erhältlich in mehreren Farben, darunter Grün Rapid PETG Filament, Space Gray Rapid PETG Filament, Blau Rapid PETG Filament, Braun Rapid PETG Filament, Orange Rapid PETG Filament, Beige Rapid PETG Filament und Gelb Rapid PETG Filament, liefert LANDU Rapid PETG sowohl zuverlässige Leistung als auch attraktive fertige Modelle.

Hauptmerkmale

Hochgeschwindigkeits-PETG-Druck
Die optimierte PETG-Formel verbessert die Kühl- und Erstarrungsleistung und unterstützt Hochgeschwindigkeits-Druckabläufe bei gleichbleibender zuverlässiger Druckqualität.
Hohe Zähigkeit und Haltbarkeit
Im Vergleich zu Standard-PLA bietet PETG eine bessere Zähigkeit, Schlagfestigkeit und Haltbarkeit für funktionale Anwendungen.
Einfache Druckleistung
LANDU Rapid PETG bietet eine reibungslose Extrusion, stabile Formgebung und reduziert Druckprobleme wie schlechte Haftung oder Düsenverstopfung.
Wasser- und Chemikalienbeständigkeit
PETG bietet eine gute Beständigkeit gegen Feuchtigkeit und viele gängige Chemikalien, wodurch es für praktische Anwendungen und Außenbereiche geeignet ist.